Section type industrial gates

Gates are of type “Sandwich” sections, which are insulated with polyurethane foam (heat transmission coefficient: p 0.48 W / m2 K). The superstructure design: vertical and horizontal rails, hinges, rollers and garters are galvanized by the hot galvanizing method, providing perfect protection against corrosion.

Available colours

Standard colours outside

• BROWN – RAL 8014 – 8017
• WHITE – RAL 9002 – 9016
• ALUMINIUM – RAL 9006
• GREY – RAL 7016
• BLUE – RAL 5010
• GREEN– RAL 6009 – 6005
• RED – RAL 3000

Standard colours inside

• OFF-WHITE – RAL 9002

Based on your needs of the colour of gates, we can painting in any colour from RAL and NCS catalogues.

SIZES

The maximum available dimensions of this type gates are 8 m width and 6.4 m height.

The panel types

• corded – horizontal board imitation with plaster or wooden texture
• glazed – organic glass package in aluminium profile frame

Optional equipment

• The built-in section of a rectangular window (680mm X 370 mm) with organic glass package.
• The key – fitted to the gate if not automation. Ensure the closure from both the inside and the outside.
• Personnel door.

Gates automation

All gates are possible to equip with opening / closing automation, which is operated by remote control, the original equipment shall be operated with a control panel on the wall.

Special two-leaved gates

In places where it is not possible to set lift-off gates here are sections panels type gate.